Now, memory OC's generally don't provide that much FPS gains, so it's up to you if you even want to tweak this setting as well. Once you have your maximum stable core overclock figured out, you can do the same for the Memory. Test (Prime95 or Heaven, or any other benchmark for ~5-10 mins).All components have different voltage tolerances.Voltage increases always should be tiny. Only increase voltage if your temperature values are safe at FULL load. Voltage and heat are the things you want to watch out for. If you don't observe any of these, then you are safe. OC can be risky, if done incorrectly, so be very careful when overclocking.įor the system stability, you need to look for artifacts, polygons, or a system FREEZE/hang after applying the overclocking settings. You need to observe at which frequency the GPU gives you a stable result. If the system is showing artifacts, polygons, and/or it freezes, then you need to dial down the speed in small increments, like e.g. Example: suppose if your card runs at 1500 MHz, then you shouldn't increase the frequency any higher than 25-50 MHz. Try to not increase the frequency higher than 5% on both the core and memory clocks. You need to OC in small increments first, and check for the system/GPU stability.
0 Comments
Leave a Reply. |